Orbital Cuff Class – Art Accents – Sat., Oct.19, 2013

Create this chic Orbital Cuff that is organically manipulated with crimped wire embellishments; no two are alike.  Students will learn manipulation techniques unique to designing with WireKnitZ®, a tubular wire mesh, while working with the tools that make this such a fun project.  There will be an assortment of pearls available for purchase, but welcome you to bring your own.

See map link at page bottom.


Saturday, October 19, 2013

Please arrive by 10:15 to select your materials.
3-hour class begins promptly at 10:30 AM to 1:30 PM
Art Accents Saturday Hours: 10:00 - 4:00


Art Accents, 28168 Woodward Ave. Royal Oak, MI 48067
(North of Catalpa – 11 1/2 Mile)  Ph. (248) 542-6683
Note: Art Accents is a  picture frame shop carrying the entire WireKnitZ® collection.

See map link at page bottom.


To preregister, please call Art Accents at 248.542.6683, or stop in the shop…
Art Accents
28168 Woodward Ave.  (North of Catalpa – 11 ½ Mile Rd.)
Royal Oak, MI 48067
For class information, please contact Norma at norma@wireknitz.com, or call 248.544.1911

Norma Melton

Skill Level:
Requires some dexterity

Workshop Fee:
$25.00 plus material costs of approximately $20.00 - 25.00

  • Please arrive by 10:15 to allow a few minutes to select your WireKnitZ® color(s) and crimping wire.
  • Please bring the following tools: chain nose pliers, round nose pliers and wire cutters, or you can use ours.
  • All specialty tools provided.
  • Crystals, pearls and beads available for purchase, or feel free to bring your own that will accommodate a 20 gauge wire.
  • WireKnitZ® must be purchased at Art Accents.
  • Class size is limited to 6.

Materials & Tools needed to complete the Orbital Cuff:
1 - 9-inch length 3000 Series WireKnitZ®
10-feet 20 gauge wire (bare uncoated preferred)
2 - 14mm Pearls
6 - 4 or 6mm Pearls with large holes to accommodate 20 g. wire
Tube Wringer**
Wrist Mandrel**
Tape Measure
Wire Cutters
Chain nose pliers
Round nose pliers
**All specialty tools provided.  Please feel free to use our scissors and wire cutters.  Tube Wringer, Wrist Mandrel, 20 g. bare wire and silver filled wire available for purchase.   

Map link below

Link: http://mapq.st/1aOfP08